Figure 82 – Vaisala Hydromet Data Collection Platform User Manual
Page 193
Chapter 4 ________________________________________________ Configuring Telemetry Options
VAISALA______________________________________________________________________ 191
It is recommended that you keep the default settings in the
Configure frame:
2.
Proceed to the Devices view by clicking Next.
a.
Select Modem Iridium in the Available list.
b.
Click the Add button.
c.
Double-click the Connector list for Iridium_modem_1 in the
I/O Connections frame in order to select the COM port.
d.
Leave the EXCITATION selection to <None>.
0711-171
Figure 82
Equipment View: Selection I/O Connection
for Iridium Modem
Option
Default Value
Service connection enabled
selected
Speed
19200
Data bits
8
Stop bits
1
Parity
None
Hardware-controlled RTS
selected
CTS required for transmission
selected