Vaisala Hydromet Data Collection Platform - Manual (Page 95)

Chapter 3 _____________________________________________ Configuring Modules and Sensors
VAISALA_______________________________________________________________________ 93
4. Select the port in the Options frame and read carefully the
information window in the lower left corner.
1007-028 Figure 43 Configuring HTMP155 with Active Output
To configure HMP155 with passive output, proceed as follows:
1. Open an existing setup in the Setup view or create a new one.
2. Proceed to the Sensors view.
3. Select HMP155 PT100 from the Available list and click the Add
button to insert the sensor into the setup. Lizard automatically
suggests channels 0 and 7 for the measurements.