Figure 23 – Vaisala Hydromet Data Collection Platform User Manual
Page 64
User's Guide ______________________________________________________________________
62 __________________________________________________________________ M210933EN-C
If you need to check/modify the weather transmitter configuration,
proceed as follows:
1.
Start Lizard.
2.
Open an existing setup in the Setup view or create a new one.
3.
Configure the weather transmitter WXT520 hardware in the
Optional hardware view as shown in
In this example, COM1 has been selected for use with the
WXT520 sensor.
It is recommended that you keep the default settings in the Line
parameters frame.
0711-130
Figure 23
Optional Hardware View: Configuring Weather
Transmitter Hardware
4.
Proceed to the Equipment view as shown in
.
a.
Scroll down the Available list box for WXT520.
b.
Click on the Add button to select WXT520.
c.
Double-click the Connector list for WXT520 in the I/O
Connections frame in order to select the COM port.