Vaisala Hydromet Data Collection Platform - Manual (Page 372)

User's Guide ______________________________________________________________________
370 _________________________________________________________________ M210933EN-C
Connection Open Command
The Connection open command parameter defines the dial string for
opening the GPRS connection.
DNS IP Address
The DNS IP address parameter defines the IP address for Domain
Name Server. The server in that particular address provides services
that are needed for translating domain names into IP addresses. The
correct value can be obtained from the Internet service provider.
eMail Server
The eMail server parameter defines the name of the server for handling
outgoing mail. The correct name can be obtained from the Internet
service provider.
eMail Return Address
The eMail return address parameter specifies the name of the Station
setting parameter containing the e-mail address that is shown as sender
for output messages. New Station setting parameters can be created
using the Static variables dialog in the Setup configuration view. To
set the value for the parameter, use either the Terminal software Station
settings window, or the spset command in service connection. For
example, the eMail return address parameter my_email in
Figure 198
on page 369 is a static parameter that can be defined in the Station
settings window.
This setting has to be formatted as user@domain, for example,
[email protected]. Note that you can freely set this value, but to
maintain compatibility with future features, prefer selecting names that
can be real e-mail addresses. The domain has to be an existing one.
NOTE Always use quotation marks around the eMail return address
parameter when setting the value with the Station settings window.