INFICON Cygnus 2 Thin Film Deposition Controller - Manual (Page 121)

6 - 5
IP
N 07
4-
54
5-
P1
E
Cygnus 2 Operating Manual
6.5 MESSAGE Page Set-up
Ten 19 character messages can be created by the user from the front panel or via
communications. ASCII characters allowed include all the characters starting with
the space character h20 through the character h7E. These Messages are turned
on and off under control of logic statements. Up to four Messages can be displayed
in the Message area. Newer Messages will displace older ones. Cygnus 2 status
messages have priority and will also displace user Messages.
Move the cursor key to one of the 10 Message lines. Then use the alphanumeric
keys in cell-phone fashion to enter characters. Use 0 for a space and the _
character, A second press on 0 enters numeric 0. #,& and * characters can be
entered by pressing 1 multiple times. To edit a Message, move the cursor to the
Message and press any numeric key.
Figure 6-4 General message page