4 sensor screen – INFICON Cygnus 2 Thin Film Deposition Controller User Manual
Page 63
Advertising
3 - 13
IP
N 07
4-
54
5-
P1
E
Cygnus 2 Operating Manual
3.3.4 Sensor Screen
From the main MENU display, placing the cursor on Sensor and pressing MENU
brings up the Sensor display.
The Sensor Overview display, see
, shows the current configuration for
all six Sensors.
Figure 3-8 Sensor overview display
Moving the cursor onto one of the Sensor numbers and pressing F1 Select Sensor
brings up the Sensor display
See
section 4.1.2, Sensor Parameters, on page 4-2
for programming details.
Advertising