Rockwell Automation 20B PowerFlex 700 AC Drives Vector Control (v4.001 and up) - Manual (Page 14)

14 Rockwell Automation Publication 20B-UM002G-EN-P - July 2014
Preface
c5
ND Rating
690V, 50 Hz Input
Code Amps kW Frame
052 52 45 5
060 60 55 5
082 82 75 5
098 98 90 6
119 119 110 6
142 142 132 6
e
HIM
Code Operator Interface
0 Blank Cover
3 LCD Display, Full Numeric Keypad
J ♦
Remote (Panel Mount), IP66, NEMA/UL Type 12 Full
Numeric LCD HIM
K ♦
Remote (Panel Mount), IP66, NEMA/UL Type 12 Prog. Only
LCD HIM
♦ Available with Frames 5…6 Stand-Alone IP54 drives (Enclosure Code
"G").
f
Documentation
Code Type
A Manual
N No Manual
Q
No Shipping Package (Internal Use
Only)
g
Brake
Code w/Brake IGBT ‡
Y Yes
N No
‡ Brake IGBT is standard on Frames 0-3, optional on Frames 4-6 and
not available on Frames 7…10.
h
Internal Braking Resistor
Code w/Resistor
Y Yes
N No
Not available for Frame 3 drives or larger.
j
Comm Slot
Code Network Type
C ControlNet (Coax)
D DeviceNet
E EtherNet/IP
N None
k
Control & I/O
Code Control I/O Volts
A Standard ♦ 24V DC/AC
B Standard ♦ 115V AC
C Vector Δ 24V DC
D Vector Δ 115V AC
N Standard None
Δ Vector Control Option utilizes DPI Only.
♦ Frame 0…6 drives only.
l
Feedback
Code Type
0 None
1 Encoder, 12V/5V
m
Future Use
n
Special Firmware (Frames 0…6 Only)
Code Type
AD ♦ 60 Hz Maximum
AE ♦ Cascading Fan/Pump Control
AX ♦ 82 Hz Maximum
BA ♦ Pump Off (for pump jack)
♦ Must be used with Vector Control option C or D (Position k). Positions
m-n are only required when custom firmware is supplied.
d
Enclosure
Code Enclosure
A IP20, NEMA/UL Type 1
F ♠
Open/Flange Mount
Front: IP00, NEMA/UL Type Open
Back/Heatsink: IP54, NEMA Type 12
N ♣
Open/Flange Mount
Front: IP00, NEMA/UL Type Open
Back/Heatsink: IP54, NEMA 12
G ♠
Stand-Alone/Wall Mount
IP54, NEMA/UL Type 12
U
Roll-In
Front: IP00, NEMA/UL Type Open
Back/Heatsink: IP54, NEMA 12
Frames 8 & 9 Only
♠ Only available for Frame 5 & Frame 6 drives, 400…690V.
♣ Only available for Frames 7…10.
i
Emission
Code CE Filter § CM Choke
A Yes Yes
B # Yes No
N No No
§ Note: 600V class drives below 77 Amps (Frames 0-4) are declared to
meet the Low Voltage Directive. It is the responsibility of the user to
determine compliance to the EMC directive. Frames 7…10,
400/480V AC drives (Voltage Rating codes "C" and "D") meet CE
certification requirements when installed per recommendations.
# Only available for 208…240V Frame 0-3 drives.
20B D 2P1 A 3 A Y N A E C 0 NN AD
a b c1…c5 d e f g h i j k l m n