Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module - Manual (Page 151)

151 Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
Configure Output Behavior with RSLogix 5000 Version 16 and Earlier 151
Specify the Configurable On/Off Behavior
1. In the CFM_DEMO program, select the Controller Tag folder and view
the Monitor Tags tab.
2. Expand the CFM_B_C tag until you reach the
CFM_B_C.OutputWindow data tags.
3. In the Value column of CFM_B_C.OutputWindow FreqOn and
FreqOff data tags, enter the desired On and Off frequency limits.
See Table 5 on page 58 for more information about determining your
On/Off frequency limits.
IMPORTANT
Test the configuration before implementing the changes
into your production process.