How to enable output behavior configuration – Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module User Manual
Page 59
![background image](/manuals/579302/59/background.png)
59
Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
Configurable Flowmeter Module Features and Operational Modes 59
How To Enable Output Behavior Configuration
To enable output behavior configuration for a 1756-CFM module with
firmware revision 2.4, select one of these options.
If you are using RSLogix 5000 software version 16 or earlier, see
If you are using RSLogix 5000 software version 17 or later, add a new
module to your I/O Configuration folder and complete the following
steps.
1. On the Select Module screen, select the 1756-CFM module and click
OK.
The Select Major Revision window opens.
2. Verify that Major Revision 2 is chosen and click OK.
The New Module dialog box opens with Major Revision 2 chosen.
Output Behavior configuration is enabled.