Wiring the module – Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module User Manual
Page 69
Advertising
69
Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
Installing the Configurable Flowmeter Module 69
1756-TBNH NEMA Screw RTB
1. Strip 8mm (5/16 in.) maximum length of wire.
2. Turn the terminal screw counterclockwise.
Figure 5.1
3. Wrap wire around the terminal.
4. Turn the terminal screw clockwise until it tightens on the wire.
Wiring the Module
You can only connect wiring to your module through an RTB or IFM. In this
chapter, we show how to wire the 1756-CFM for three applications.
Standard Flowmeter Wiring Example
Standard Prover/Detector Wiring Example
Standard Output Wiring Example
42516
Advertising