Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module - Manual (Page 80)

80 Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
80 Configuring the Configurable Flowmeter Module
Creating a New Module
After you have started the RSLogix 5000 software and created a controller, you
must create a new CFM module. The wizard allows you to create a new
module and set communications options.
1. Go offline.
2. Select a CFM module.
IMPORTANT
You must be offline when you create a new module.
If you are not offline, use this
pull-down menu to go offline
A. Select I/O Configuration.
B. Click on the right mouse button
to display the menu.