Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module - Manual (Page 92)

92 Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
92 Configuring the Configurable Flowmeter Module
Enter Message Configuration
After creating a new tag, you must enter message configuration.
Enter message configuration on the following screens:
 Configuration Pop-Up Screen
 Communications Pop-Up Screen
 Tag Pop-Up Screen
A description of the purpose and set-up of each screen follows.
Configuration Pop-Up Screen
This screen provides information on what module service to perform and
where to perform it.
For example, the screen below shows the information needed to send a
configuration message (module service) to a 1756-CFM module (where to
perform service).
This table contains information that must be entered on the configuration
screen to perform the example CFM module service:
Click here to see the message
configuration pop-up screens
Message Type is CIP Generic
Service Code is 4c
Class Name is 4
Instance Name is 16 Source is Local:1:C
Num. Of Elements
is 300
Field Select
Service Code 4c
Class Name 4
Instance Name 16
Source Local:1:C (dependent on module location)
Number of Elements 300
Destination N/A