Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module - Manual (Page 91)

91 Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
Configuring the Configurable Flowmeter Module 91
4. Create a tag for the message instruction.
Fill in the following information when the New Tag pop-up
screen appears:
A. Right-click on the question
mark (?) to see the
pull-down menu.
B. Click on New Tag.
IMPORTANT
We suggest you name the tag to indicate what module
service is sent by the message instruction. For example, the
message instruction below is used to write configuration.
Name the tag here.
Choose the Base Tag Type here.
Choose the Message Data Type here.
Choose the Controller Scope here.
IMPORTANT: Message tags can only
be created with the Controller Scope.
Enter an optional description here.