Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module - Manual (Page 86)

86 Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
86 Configuring the Configurable Flowmeter Module
Changing Configuration
Information at the Tags
Some configurable features are changed on a module-wide basis and some on
a point-by-point basis.
Configurable Features
There are two ways to change the configuration:
 Use a pull-down menu.
 Highlight the value of a particular feature for a particular point and type
a new value.
Pull-down Menu
Highlight Value
A. Click on the far left side of the
Value column and a pull-down
menu appears.
B. Highlight the point that needs to be
changed and type a valid new value.
A. Highlight the value of the
feature you want to change.
B. Type in the valid new value.