Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module - Manual (Page 74)

74 Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
74 Installing the Configurable Flowmeter Module
1. Align the side, top and bottom RTB guides with the side, top and
bottom module guides.
2. Press quickly and evenly to seat the RTB on the module until the latches
snap into place.
3. Slide the locking tab down to lock the RTB onto the module.
Removing the Removable
Terminal Block from the
Module
Before removing the module, you must remove the RTB.
Module top guide
RTB side guides
20853–M
Locking tab
20854–M
WARNING
!
When you connect or disconnect the Removable Terminal
Block (RTB) with field side power applied, an electrical arc
can occur. This could cause an explosion in hazardous
location installations.
Be sure that power is removed or the area is nonhazardous
before proceeding.