Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module - Manual (Page 95)

95 Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
Configuring the Configurable Flowmeter Module 95
Configuring CFM Modules
in a Remote Chassis
ControlLogix ControlNet Interface modules (1756-CNB or 1756-CNBR) are
required to communicate with CFM modules in a remote chassis.
You must configure the communications module in the local chassis and the
remote chassis before adding new I/O modules to the program.
1. Create a 1756-CNB or 1756-CNBR module in the local chassis.
2. Choose a 1756-CNB or 1756-CNBR module on the Select Module Type
screen.
3. Configure the 1756-CNB or 1756-CNBR module.
For more information on the ControlLogix ControlNet Interface
modules, see the ControlLogix ControlNet Interface User Manual,
publication 1756-6.5.3.
A. Select I/O Configuration.
B. Click on the right mouse
button to display the menu.
C. Select New Module