Connect wires to the rtbs – Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module User Manual
Page 68
Advertising
![background image](/manuals/579302/68/background.png)
68
Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
68 Installing the Configurable Flowmeter Module
Connect Wires to the RTBs
There are two types of RTBs available for use with the
1756-CFM module:
1756-TBSH Spring Clamp RTB
1756-TBNH NEMA Screw RTB
1756-TBSH Spring Clamp RTB
1. Strip 11mm (7/16 in.) maximum length of wire.
2. Insert the screwdriver into the inner hole of the RTB, as shown in this
figure.
3. Insert the wire into the open terminal and remove
the screwdriver.
20863–M
Screwdriver
Wire
Advertising