Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module - Manual (Page 96)

96 Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
96 Configuring the Configurable Flowmeter Module
4. Create a 1756-CNB or 1756-CNBR module for the remote chassis.
5. Choose a 1756-CNB or 1756-CNBR module on the Select Module Type
screen.
6. Configure the remote 1756-CNB or 1756-CNBR module.
7. Add remote CFM modules to your configuration through the remote
1756-CNB or 1756-CNBR module.
8. Configure remote CFM modules using the same procedures detailed
earlier in this chapter to configure local CFM modules.
A. Select the local communications module.
B. Click on the right mouse button and select
New Module.
Notice that the remote
1756-CNB module is added to
the Controller Organizer through
the local 1756-CNB module.
IMPORTANT
You must run RSNetWorx for ControlNet software for the
owner-controller to establish connections, and
send configuration information, with the remote
CFM module.
A. Select the remote communications module.
B. Click on the right mouse button and select
New Module.