Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 103)

Setting Up Allen-Bradley Ethernet to RIO Block Transfer Pass Thru Communications 10-5
The Configure driver for Ethernet to PLC-5 or 5820-EL dialog box
appears.
6. In the Driver Station field, enter a unique station number for your
computer on the Ethernet network. Valid numbers are from 0 to 63.
7. In the Current Mappings field, select an available mapping.
8. In the IP Address or hostname field, type the IP address or hostname of
the controller.
Important: Note the IP address. When you configure a DriveTools32
application, you need to enter it in the Communications Setup dialog box.
9. Click Accept to map the IP address to an available mapping.