Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 93)

Setting Up DeviceNet Direct Communications 9-9
Configuring the Communications Driver
A driver is the software interface to the hardware device that allows RSLinx to
communicate with your drive. To configure the driver, you need to:
1. Start RSLinx.
2. In the Communications menu, select Configure Drivers. The Configure
Drivers dialog box appears.
3. In the Available Driver Types field, select DeviceNet Drivers.
4. Click Add New. The DeviceNet Driver Selection dialog box appears.