Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED User Manual
Page 45
Advertising
Setting Up DH+ Direct Communications
5-5
Mapping the Configured Driver to the KTPort Value
After configuring the driver, you must map it to a legacy INTERCHANGE API
xKT:0 label in RSLinx so that DriveTools32 can use it. To map the configured
driver, you need to:
1.
In the Communications menu, select Configure Client Applications. The
Configure Client Applications dialog box appears.
2.
In an unused KT:0 field, select the new DH+ driver.
Important: Note the KT:0 field that you select. When you configure a
DriveTools32 application, you need to enter the field number in the
Communication Setup dialog box.
3.
Click OK to map the driver to the KT:0 value.
Advertising