Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 44)

5-4 Setting Up DH+ Direct Communications
5. Type a name (if desired), and then click OK. The Configure Allen-Bradley
1784-KTX/KTXD dialog box appears.
Important: If you are configuring a 1784-PCMK card, a different dialog box
appears (not shown). If you are using Windows NT, you must specify an
interrupt in the Interrupt field. To view interrupts in Windows NT, click the
Start button, and select Programs, Administrative Tools, and Windows NT
Diagnostics. In the Windows NT Diagnostics dialog box, click the Resources
tab.
6. In the Value field, select the DH+ interface card that you are using.
7. In the Property box, edit fields to match the settings of the interface card.
Important: To edit a field, click it in the Property box; then select a value in
the Value field.
8. Click OK to save the configuration. The new driver appears in the
Configure Drivers dialog box.
9. Click Close.