Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 129)

Using ControlLogix Gateways 13-5
6. In the Server’s IP Address or hostname field, type the IP address for the
Ethernet module in the ControlLogix controller.
7. Click OK. The Configure Drivers dialog box reappears, and the new driver
is running.
8. Click Close to close the dialog box.
Creating a Shortcut
After you create a communication driver to connect to the ControlLogix
controller, you must create a shortcut to the network on which the drive is
located.
1. In the Communications menu, select RSWho. The RSWho window
appears.
2. Verify that Autobrowse is selected in the upper left corner. Its box should
be checked.
ControlNet
DH+
DeviceNet
Ethernet