Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 130)

13-6 Using ControlLogix Gateways
3. Navigate to the network to which you want to connect.
Important: Count the number of backplanes that you use. A backplane allows
you to move from one network to another. If you use more than one backplane,
you will need to enter the total number when you configure DriveTools32.
4. Right-click on the network, and select Create Shortcut. The Add New
RSLinx Driver dialog box appears.
5. If desired, type a name in the field.
6. Click OK. The shortcut is added in the left pane of the RSWho window.
7. Close the RSWho window.