Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 94)

9-10 Setting Up DeviceNet Direct Communications
5. Double-click the type of adapter that you are using to connect your
computer to the DeviceNet network. A Device Configuration dialog box
appears.
6. Under Serial Port Setup, select the communications port and the data rate
that you are using in the computer.
7. Under DeviceNet Port Setup, select a unique node address for the
computer on the DeviceNet network and the DeviceNet network data rate.
8. Click OK to configure the driver. The Add New RSLinx Driver dialog box
appears.
9. Type a name, and then click OK. The new driver appears in the Configure
Drivers dialog box.
10. Click Close.