Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED User Manual
Page 136
14-2
Using ControlLogix Gateway to RIO Block Transfer Pass Thru Communications
You can connect between the same types of networks or between different types
of networks. For example, you can connect from one ControlNet network to
another ControlNet network, or you can connect from an Ethernet network to a
ControlNet network. The type of network that you are using limits the possible
connections. The following table lists the possible connections that you can
make from each type of network:
Figure 14.1 shows an example:
Figure 14.1
ControlLogix Gateway to RIO Block Transfer Pass Thru Connection
Network
Possible Connections
ControlNet
ControlNet, DeviceNet, DH+, or a drive
DH+
ControlNet, DeviceNet, DH+, or a drive
Ethernet
ControlNet, DeviceNet, or DH+
SCANport-
Compatible
Product
1395
Drive
1336
FORCE
Drive
1203-GK1
Ethernet
ControlNet
Remote I/O
ControlLogix
Backplane 1
PLC-5