Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 2)

Important User
Information Because of the variety of uses for the products described in this publica-
tion, those responsible for the application and use of this control equip-
ment must satisfy themselves that all necessary steps have been taken to
assure that each application and use meets all performance and safety
requirements, including any applicable laws, regulations, codes and stan-
dards.
The illustrations, charts, sample programs and layout examples shown in
this guide are intended solely for purposes of example. Since there are
many variables and requirements associated with any particular installa-
tion, Rockwell Automation does not assume responsibility or liability (to
include intellectual property liability) for actual use based upon the
examples shown in this publication.
Rockwell Automation publication SGI-1.1, Safety Guidelines for the
Application, Installation, and Maintenance of Solid-State Control (avail-
able from your local Rockwell Automation office), describes some
important differences between solid-state equipment and electromechan-
ical devices that should be taken into consideration when applying prod-
ucts such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or
in part, without written permission of Rockwell Automation, is prohib-
ited.
Throughout this manual we use notes to make you aware of safety con-
siderations:
Attention statements help you to:
• Identify a hazard.
• Avoid the hazard.
• Recognize the consequences.
Important: Identifies information that is critical for successful applica-
tion and understanding of the product.
!
ATTENTION: Identifies information about practices
or circumstances that can lead to personal injury or
death, property damage or economic loss.