Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED User Manual
Page 46
![background image](/manuals/580159/46/background.png)
5-6
Setting Up DH+ Direct Communications
Setting Up Communications in a DriveTools32 Application
Before a DriveTools32 application can communicate with a drive, you need to
configure the application. To do so, you need to:
1.
Start the DriveTools32 application.
2.
In the Options menu, select Communication Setup. The Communication
Setup dialog box appears.
3.
Click the DH+ tab.
4.
Under Connect Type, select Data Highway Plus (DH+) Direct.
5.
In the Enter INTERCHANGE Port Mapping # field, type the number of
the KT:0 port used by the DH+ driver in the RSLinx Configure Client
Applications dialog box.
Important: To view the KT Port number used by the DH+ driver, select
Configure Client Applications in the RSLinx Communications menu.
6.
If you are using a 1336 FORCE and its drive firmware version is 0.10,
select 1336T Two Word Header (used ONLY for 1336T version 0.10).
7.
Click OK.