Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 25)

Installing and Starting DriveTools32 2-3
Installing RSLinx You must have version 2.10.118 (or greater) of RSLinx or RSLinx Lite installed
and properly configured before you can use DriveTools32 to communicate with
a drive. It is recommended that you also install RSLinx Service Pack 1 to update
RSLinx to version 2.10.167. When you finish installing DriveTools32, you are
prompted to install RSLinx Lite and the necessary service packs.
Important: If you already have RSLinx (version 2.10.118) installed on the
computer, do not install the RSLinx that is shipped with DriveTools32. Click
No.
If you need to install RSLinx, follow these directions:
1. Click Yes to display the RSLinx Install wizard.