Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 128)

13-4 Using ControlLogix Gateways
These instructions show how to set up a driver for an Ethernet connection.
1. Start RSLinx.
2. In the Communications menu, select Configure Drivers. The Configure
Drivers dialog box appears.
3. In the Available Driver Types field, select Remote Device via Linx or
1756-ENET Gateway.
4. Click Add New. The Add New RSLinx Drive dialog box appears.
5. Type a name (if desired), and then click OK. The Remote Devices via Linx
or 1756-ENET Gateway dialog box appears.