Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 38)

4-2 Setting up RS-232 Point-to-Point Serial Communications for a 1395 Drive
Hardware Required Hardware
The following hardware is required for 1395 serial communications:
Setting Up the Hardware
To use DriveTools32 with this type of communications, you must:
• Ensure that the drive and adapter are properly installed and powered.
• Ensure that cables are securely connected and protected from damage.
Disabling RSLinx The following instructions describe how to disable RSLinx so that DriveTools32
can use the serial communications port for a 1395 connection. If you have
questions about RSLinx, refer to its online help. To disable it, follow these
instructions:
1. Start RSLinx.
2. In the Communications menu, select Configure drivers. The Configure
Drivers dialog box appears.
3. If a configured driver using the communications port is running, click it in
the Configured Drivers list.
4. Click Delete. The driver is removed from the Configured Drivers list.
5. Click Close.
Drive Required Drive Hardware Required Computer Hardware
1395 1300-ITSSC RS-232 port