Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 104)

10-6 Setting Up Allen-Bradley Ethernet to RIO Block Transfer Pass Thru Communications
10. Click OK to configure the driver. The new driver appears in the Configure
Drivers dialog box.
11. Click Close.
Setting Up
Communications
in a DriveTools32
Application Before a DriveTools32 application can communicate with a drive, you must
configure the application. To do so, you need to:
1. Start a DriveTools32 application.
2. In the Options menu, select Communication Setup. The Communication
Setup dialog box appears.
3. Click A-B Ethernet.