Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED - Manual (Page 121)

Using a Modem Connection 12-7
Mapping the Configured Driver to the KTPort Value
After configuring the driver, you must map it to a legacy INTERCHANGE API
xKT:0 label in RSLinx so that DriveTools32 can use it. To map the configured
driver, you need to:
1. In the Communications menu, select Configure Client Applications. The
Configure Client Applications dialog box appears.
2. In an unused KT:0 field, select the DF1 device.
Important: Note the KT:0 field that you select. When you configure a
DriveTools32 application, you need to enter the field number in the
Communication Setup dialog box.
3. Click OK to map the driver to the KT:0 value.