Rockwell Automation 9303 DRIVE TOOLS 32 VER 2.50 GETTING STARTED User Manual
Page 47
Advertising
![background image](/manuals/580159/47/background.png)
Setting Up DH+ Direct Communications
5-7
Connecting to the Drive
After configuring RSLinx and DriveTools32, you are ready to connect to a drive.
1.
In the Drive menu, select Connect to Drive. The DH+ Network Connect
to Drive dialog box appears.
2.
Click WHO. The WHO’s Active on DH+ Network dialog box appears.
3.
Double-click the station to which you want to connect.
The DriveTools32 application is now communicating with the drive. If you are
prompted to create a new database, click Yes.
Important: If a prompt appears to alert you that the application failed to
communicate with the drive, refer to Chapter 16, Troubleshooting.
Advertising