Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 112)

4-80 LiquiFlo 1.5 AC Drive, Software Reference Version 1.2
Selects the drive status that will energize an output relay.
Sets the relay activation level for options 10-15 in Digital Out”x” Sel. Units are
assumed to match the above selection (i.e., At Freq = Hz, At Torque = Amps).
380 Digital Out1 Sel
Range: 1 = Fault
2 = Alarm
3 = Ready
4 = Run
5 = Forward Run
6 = Reverse Run
7 = Auto Restart
8 = Powerup Run
9 = At Speed
10 = At Freq
11 = At Current
12 = At Torque
13 = At Temp
14 = At Bus Volts
15 = At PI Error
16 = DC Braking
17 = Curr Limit
18 = Economize
19 = Motor Overld
20 = Power Loss
21 = Input 1 Link
22 = Input 2 Link
23 = Input 3 Link
24 = Input 4 Link
25 = Input 5 Link
26 = Input 6 Link
27 = Shunt Trip
28 = Aux Run
Default: 1 = Fault
Access: 0 Path: Inputs & Outputs>Digital Outputs
See also: 1-4, 12, 48, 53, 137, 147, 157, 184, 218, 381-383, 385, 386
381 Dig Out1 Level
Range: 0.0 to 819.2 [0.1]
Default: 0.0
Access: 0 Path: Inputs & Outputs>Digital Outputs
See also: 380