Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 36)

4-4 LiquiFlo 1.5 AC Drive, Software Reference Version 1.2
The value of the signal at the MOP (Motor-Operated Potentiometer).
The present DC bus voltage level.
A six-minute average of the DC bus voltage level.
The phase-to-phase AC line voltages, as follows:
• Parameter 16 displays L1 to L2 voltage.
• Parameter 17 displays L2 to L3 voltage.
• Parameter 18 displays L3 to L1 voltage.
Values are scaled such that 480 VAC is displayed as 4.800.
11 MOP Frequency
Range: +/- 400.0 [0.1 Hz]
Default: Read Only
Access: 1 Path: Monitor>Metering
See also:
12 DC Bus Voltage
Range: Based on drive rating [0.1 VDC]
Default: Read Only
Access: 0 Path: Monitor>Metering
See also:
13 DC Bus Memory
Range: Based on drive rating [0.1 VDC]
Default: Read Only
Access: 1 Path: Monitor>Metering
See also:
16
17
18 Analog In1 Value
Analog In2 Value
Analog In3 Value
Range: -/+32.767 V [0.001 V]
Default: Read Only
Access: 1 Path: Monitor>Metering
See also: