Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 83)

Parameter Descriptions 4-51
Present operating temperature of the drive power section.
Accumulated percentage of drive overload. Continuously operating the drive over
100% of its rating will increase this value to 100% and cause a drive fault.
Accumulated percentage of motor overload. Continuously operating the motor over
100% of the motor overload setting will increase this value to 100% and cause a drive
fault.
Figure 4.19 – Dig Out Status (276)
0 x x 0 x x x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Output Energized
0 =Output De-energized
x =Reserved
Bit #
Digital Out1 Digital Out2
Nibble 1 Nibble 2 Nibble 3 Nibble 4
218 Drive Temp
Range: -/+100 degC [0.1 degC]
Default: Read Only
Access: 1 Path: Utility>Diagnostics
See also:
219 Drive OL Count
Range: 0.0 to 100.0% [0.1%]
Default: Read Only
Access: 1 Path: Utility>Diagnostics
See also: 150
220 Motor OL Count
Range: 0.0 to 100.0 [1.0 %]
Default: Read Only
Access: 1 Path: Utility>Diagnostics
See also: 47, 48