Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 15)

Using the LCD OIM 2-3
If the LCD OIM is not the selected control source or reference source, removing the
OIM while the drive is powered will have no effect on drive operation.
2.2 Display Description
➀ Function Key (F1, F2, F3, F4) definitions
➁ Port/peripheral identification. Identifies port or peripheral on DPI about
which the OIM is displaying information. See section 2.5.
➂ PI loop status: PI = PI control is active.
➃ Operating status (for example, Running, Stopped, etc.)
➄ Alarm annunciation. = Alarm has occurred.
➅ Auto/Hand mode status.
➆ Write-protect password status:
(unlocked) = password disabled;
(locked) = password enabled. See section 3.4
Figure 2.3 – The Display (Main Menu Shown)
P0: LiquiFlo 1.5
PI Auto Stopped
Main Menu
Start-Up
➀
➁
➂
➃
➄ ➅
Operational Status Line
Menu, Programming Screen,
or Process (User) Display
Device Selected/Error Text
Function Key Line Lang
➆