Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 18)

2-6 LiquiFlo 1.5 AC Drive, Software Reference Version 1.2
2.4 Powering Up and Adjusting the LCD OIM
The first time the LCD OIM is powered up, you will be prompted to select a language
for the display text. If the Start-Up routine has not been completed, the Start-Up menu
is displayed immediately following the language selection screen.
On subsequent power ups, if both of these requirements have been met, the Main
Menu is displayed after the initialization screen.
2.4.1 Selecting the Fast Power Up Feature
The fast power up feature bypasses the initialization screen at power up, and the Main
Menu is displayed immediately. To select this feature, select Fast PwrUp Mode from
the Display menu.
2.4.2 Adjusting the Screen Contrast
To adjust the screen contrast, select Contrast from the Display menu.
2.4.3 Resetting the Display
To return all the options for the display to factory-default values, select Reset Display
from the Display menu.
2.5 Selecting a Device in the System
The LCD OIM can access and display data from any active drive or peripheral device
on the network. The drive (port 0) is the default device selected.
To select a device, select the Device Select icon from the Main Menu. The options
listed depend on what is connected to the network.
The name and DPI port number of the device being accessed is shown on the OIM’s
display (see figure 2.3).
2.6 Using the LCD OIM to Program the Drive
The LCD OIM enables you to view and adjust parameters in the drive or in peripheral
devices connected to the drive. The parameters available for viewing or adjustment
depend on the device selected. See section 2.5 for information about selecting a
device.
The method of viewing and adjusting parameters is the same regardless of the device
selected.
2.6.1 Viewing and Adjusting Parameters
Refer to chapter 3 for information on how to access the parameters in the drive.
Each parameter screen contains the following information:
• Parameter number
• Parameter name
• Current parameter value and units