Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 29)

Programming Basics 3-3
3.3 Accessing the Parameters
Parameters are programmed and viewed using the LCD OIM or VS Utilities software.
The LCD OIM displays parameters by group, by individual parameter number, and
parameters that have changed from their default value.
To access parameters using the LCD OIM, select the Parameters icon from the main
screen. See figure 3.2.
See chapter 2 for information on modifying parameters using the LCD OIM.
See instruction manual D2-3488 for information on accessing and modifying
parameters using VS Utilities software.
Figure 3.2 – Accessing the Parameters Using the LCD OIM
Stopped Auto
P0: LiquiFlo 1.5
Parameters:
Changed Params
P Numbers
By Group
File:
File 2 Name
File 3 Name
File 1 Name
Monitor Lang
Auto Stopped
Main Menu
Parameters
P0: LiquiFlo 1.5
Stopped Auto
P0: LiquiFlo 1.5
Parameters:
P Numbers
Changed Params
By Group
Stopped Auto
P0: LiquiFlo 1.5
Parameters:
P Numbers
By Group
Changed Params
Group:
Group 2 Name
Group 3 Name
Group 1 Name
Changed: Par
Searching. . .
Parameter #
Parameter Text
+456.78 Unit
1234
Dflt
Parameter #
Parameter Text
+456.78 Unit
1234
Dflt
ESC/
PROG
ESC/
PROG
ESC/
PROG
ESC/
PROG ESC/
PROG
ESC/
PROG
ESC/
PROG ESC/
PROG
>>
>>
>>
>>