1output freq, 2commanded freq, 3output current – Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty User Manual
Page 34: 4torque current, 5flux current
4-2
LiquiFlo 1.5 AC Drive, Software Reference Version 1.2
The output frequency present at T1, T2, and T3 (U, V, and W).
The value of the active frequency command.
The total output current present at T1, T2, and T3 (U, V, and W).
The amount of current that is in phase with the fundamental voltage component.
The amount of current that is out of phase with the fundamental voltage component.
1
Output Freq
Range:
+/-400.0 Hz [0.1 Hz]
Default:
Read Only
Access:
0
Path: Monitor>Metering
See also:
2
Commanded Freq
Range:
+/- 400.0 Hz [0.1 Hz]
Default:
Read Only
Access:
0
Path: Monitor>Metering
See also:
3
Output Current
Range:
0.0 to Drive Rated Amps x 2 [0.1 Amps]
Default:
Read Only
Access:
0
Path: Monitor>Metering
See also:
4
Torque Current
Range:
Drive Rating x -2 to +2 [0.1 Amps]
Default:
Read Only
Access:
1
Path: Monitor>Metering
See also:
5
Flux Current
Range:
Drive Rating x -2 to +2 [0.1 Amps]
Default:
Read Only
Access:
1
Path: Monitor>Metering
See also: