Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 90)

4-58 LiquiFlo 1.5 AC Drive, Software Reference Version 1.2
Selects alarm conditions that will initiate a drive alarm. Refer to chapter 5,
Troubleshooting the Drive, for more information about alarms.
Resets all Alarm1 - 8 Code parameters (262 - 269) to zero.
A code that represents a drive alarm. The codes will appear in the order that the
alarms occur. The first code in is the first out. A time stamp is available with alarms.
259 Alarm Config 1
Range: See figure 4.25
Default: See figure 4.25
Access: 1 Path: Utility>Alarms
See also:
Figure 4.25 – Alarm Config 1 (259)
1 1 x 1 1 1 x 1 1 1 1 x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Enabled
0 =Disabled
x =Reserved
Bit #
Factory Default Bit Values
Prechrg Actv UnderV
oltage
Po
w
er Loss
Anlg in Loss IntDBRes OH Dr
v OL Lvl 1
Dr
v OL Lvl 2
Decel inhibit W
aking
Nibble 1 Nibble 2 Nibble 3 Nibble 4
261 Alarm Clear
Range: 0 = Ready
1 = Clr Alarm Que
Default: 0 = Ready
Access: 1 Path: Utility>Alarms
See also: 262 - 269
262
263
264
265
266
267
268
269 Alarm 1 Code
Alarm 2 Code
Alarm 3 Code
Alarm 4 Code
Alarm 5 Code
Alarm 6 Code
Alarm 7 Code
Alarm 8 Code
Range: 0 to 256
Default: Read Only
Access: 1 Path: Utility>Alarms
See also: 261