Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 91)

Parameter Descriptions 4-59
Sets the baud rate for attached drive peripherals. When changing this value, the drive
must be reset for the change to take effect
The final logic command to the drive resulting from the combination of all port
requests and masking functions. Each bit or set of bits represent a command to the
drive or follower device. For LiquiFlo 1.5 drives, bit 6 will always = 0.
270 DPI Baud Rate
Range: 0 = 125 kbps
1 = 500 kbps
Default: 1
Access: 1 Path: Communication>Comm Control
See also:
271 Drive Logic Rslt
Range: See figure 4.26
Default: Read Only
Access: 1 Path: Communication>Comm Control
See also:
Figure 4.26 – Drive Logic Rslt (271)
0 1 1 0 0 0 0 1 0 1 1 1 0 0 0 0
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Condition Active
0 =Condition Inactive
x =Reserved
Bit #
Stop Star
t
Jog Clear F
ault
Forw
ard
Re
verse
Local Contr
l
Mop Inc Accel 1 Accel 2 Decel 1 Decel 2 Spd Ref ID 0
(1)
Spd Ref ID 1
(1)
Spd Ref ID 2
(1)
MOP Dec
Nibble 1 Nibble 2 Nibble 3 Nibble 4
Bits
(1)
Description 14 13 12
0
0
0
0
1
1
1
1 0
0
1
1
0
0
1
1 0
1
0
1
0
1
0
1
No Command - Man.
Mode
Ref A Auto
Preset 2 Auto
Preset 3 Auto
Preset 4 Auto
Preset 5 Auto
Preset 6 Auto
Preset 7 Auto