117 trim in select, 118 trim out select – Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty User Manual
Page 55
Parameter Descriptions
4-23
Specifies which analog input signal is being used as a trim input.
Specifies if Ref A speed reference is to be trimmed.
Table 4.1 – Default Values for Preset Speeds 1-7
Parameter No.
Parameter Name
Default
101
Preset Speed 1
5.0 Hz
102
Preset Speed 2
10.0 Hz
103
Preset Speed 3
20.0 Hz
104
Preset Speed 4
30.0 Hz
105
Preset Speed 5
40.0 Hz
106
Preset Speed 6
50.0 Hz
107
Preset Speed 7
60.0 Hz
117
Trim In Select
Range:
1 = Analog In 1
2 = Analog In 2
3-8 = Reserved
9 = MOP Level
10 = Reserved
11 = Preset Spd 1
12 = Preset Spd 2
13 = Preset Spd 3
14 = Preset Spd 4
15 = Preset Spd 5
16 = Preset Spd 6
17 = Preset Spd 7
18 = Local OIM
19 = DPI Port 2
20 = DPI Port 3
21 = Reserved
22 = Network
23 = Reserved
Default:
2 = Analog In 2
Access:
1
Path: Speed Command>Speed Trim
See also:
90, 93
118
Trim Out Select
Range:
See figure 4.7
Default:
See figure 4.7
Access:
1
Path: Speed Command>Speed Trim
See also:
117, 119, 120