Rockwell Automation FlexPak/WebPak 3000 DC Drive AutoMax Network Communication Board - Manual (Page 85)

W
ebPak
3000 Drives
: Regist
er
M
a
p
7-
17
35 AutoMax Indirect Register 4 Value to be written to the parameter selected in the
corresponding Drop 2 register
36 AutoMax Indirect Register 5 Value to be written to the parameter selected in the
corresponding Drop 2 register
37 AutoMax Indirect Register 6 Value to be written to the parameter selected in the
corresponding Drop 2 register
38 AutoMax Indirect Register 7 Value to be written to the parameter selected in the
corresponding Drop 2 register
39 AutoMax Indirect Register 8 Value to be written to the parameter selected in the
corresponding Drop 2 register
40 AutoMax Indirect Register 9 Value to be written to the parameter selected in the
corresponding Drop 2 register
41 AutoMax Indirect Register 10 Value to be written to the parameter selected in the
corresponding Drop 2 register
42 AutoMax Indirect Register 11 Value to be written to the parameter selected in the
corresponding Drop 2 register
43 AutoMax Indirect Register 12 Value to be written to the parameter selected in the
corresponding Drop 2 register
44 AutoMax Indirect Register 13 Value to be written to the parameter selected in the
corresponding Drop 2 register
45 AutoMax Indirect Register 14 Value to be written to the parameter selected in the
corresponding Drop 2 register
46 AutoMax Indirect Register 15 Value to be written to the parameter selected in the
corresponding Drop 2 register
47 AutoMax Indirect Register 16 Value to be written to the parameter selected in the
corresponding Drop 2 register
48 AutoMax Indirect Register 17 Value to be written to the parameter selected in the
corresponding Drop 2 register
49 AutoMax Indirect Register 18 Value to be written to the parameter selected in the
corresponding Drop 2 register
50 AutoMax Indirect Register 19 Value to be written to the parameter selected in the
corresponding Drop 2 register
Table 7.12 – WebPak 3000 Register Map, Drop_3: Master Write Registers, FULL Connection. Tunable/Configurable Data (Drive Input Data) (Continued)
Register Bit Parameter Name (Number) Description Settings
Configurable data are read by the regulator approximately every 600 msec when Tune/Config Input Enable bit=1 and the drive is not running or jogging.