Metrohm tiamo 1.1 Manual - Manual (Page 134)

106 Workplace
Accept data only for active window
on, [ off ]
If this option is selected then the data transmitted from the balance will only
be imported into the opened sample table when this has the focus.
Import from barcode reader
on, [ off ]
If this option is selected then external data from the selected barcode
reader will be imported in the opened sample table. The field into which the
data is to be imported is defined in the device properties of the Barcode
reader.
Barcode reader
Device name
Selection of the barcode reader from which data is to be imported.
Always accept data
[ on ], off
If this option is selected then the data transmitted from the barcode reader
will be imported into the opened sample table for which this barcode reader
has been defined as the data source.
Accept data only for active window
on, [ off ]
If this option is selected then the data transmitted from the barcode reader
will only be imported into the opened sample table when this has the focus.
Import from file
on, [ off ]
If this option is selected then external data will be imported from a file (e.g.
via LIMS) into a sample table. A check will be made that the given import
file exists when opening the sample table, when loading the sample table
into the working sample table as well as at regular intervals (every 10 s)
when the sample table is open (but not when the dialog window
Edit line is
open). If the import file is present then the data from this file will be inserted
automatically at the end of the sample table. The import file is deleted after
each import.
Note
Irrespective of the number of data fields defined on the tab Display , all sample
data in the format Method name;Sample posi-
tion;ID1;ID2;ID3;ID4;ID5;ID6;ID7;ID8;Sample size;Sample size unit have to be de-
fined in the import file for each line.
Import file
File name
Entry or selection the file from which the import is to take place.
Import format
[ *.csv ]
Selection of the import format for the import of data from a file (only *.csv
possible).