Metrohm tiamo 1.1 Manual - Manual (Page 571)

Commands 543
Device type
Device types, [ 814 USB Sample Processor ]
Display or selection of the device type. If a device is selected under Device
name , this parameter is not editable any more. The device type belonging to
the selected device is displayed instead.
If the option
not defined is selected as Device name , all device types being
able to execute the command can be selected independently from the de-
vices in the device table.
Stirrer
Stirrer
[ 1 ] ... 4 (Titrando, 730, 846)
[ T1 ], T2 (tower stirrer), 1...3 (MSB stirrer) (778, 789)
[ 1 ]...3 (814, 815, 855)
1 (756, 831, Titrino)
Selection of the stirrer.
Stirrer type
801 magnetic stirrer, 802 Rod stirrer, 803 Ti Stand magnetic stirrer, 804 Ti Stand
rod stirrer, unknown
Display of the stirrer type. unknown is displayed either with devices unable
to read out the stirrer type or if no stirrer is connected.
Stirring rate
-15 ... [ 8 ] ... 15 (Titrando, 846, 814, 815, 855)
0 ... [ 8 ] ... 15 (730, 774, 778, 789)
Setting the stirrer rate and speed. The direction in which stirring takes place
changes as the sign in front of the stirrer speed changes. The default set-
ting
8 corresponds to a stirrer speed of 1000 min -1 .
Action
Switch on
[ on ], off
Switch on the stirrer. The stirrer keeps switched on after the command is
finished.
Switch off
on, [ off ]
Switch off the stirrer.
Duration
on, [ off ]; 0 ... [ 10.0 ] ... 9'999.9; s, [ min ]
Switch on the stirrer for a particular period.