Metrohm tiamo 1.1 Manual - Manual (Page 582)

554 Method
Result monitoring
on, [ off ]
The result limits are monitored while calculating the result during the deter-
mination if this option is enabled.
Lower limit
10 digits
Lower limit for the result.
Upper limit
10 digits
Upper limit for the result.
Message
Text (unlimited)
The message defined here can be put out to different targets if the result
limits are exceeded. The Text editor to enter or change the message is
opened with or by double-clicking into the message field. The For-
mula editor can be opened out of the text editor as well.
Display message
[ on ], off
If this option is enabled, all active tracks are halted and the message de-
fined above will be displayed in case the result limits are exceeded. You
can choose whether you want to continue the halted tracks with
[Continue]
or - if defined - to execute the Action stated below.
Record message
[ on ], off
If this option is enabled, the message defined above will be documented in
the determination in case the result limits are exceeded. The run is not
halted.
Message by e-mail
on, [ off ]
If this option is enabled, the message defined above will be sent to the ad-
dress defined under
[E-mail] in case the result limits are exceeded.
Opening the dialog window Send e-mail (see below) for defining the e-mail
parameters.
Acoustic signal
on, [ off ]
If this option is enabled, an acoustic signal will be emitted additionally to
the message defined above in case the result limits are exceeded.
Action
on, [ off ]
If this option is enabled, one of the following actions is automatically exe-
cuted in case the result limits are exceeded.
Stop determination
[ on ], off
The current determination is terminated and the next determination of the
series is started.
Stop determination and series
on, [ off ]
The current determination and the series are terminated.
Open the dialog window Save result template to save the result parameters
as template for creating new results.