Metrohm tiamo 1.1 Manual - Manual (Page 53)

Formula editor 25
Identifier Description Commands
.EP.DVT Drift for the end point in µg/min KFC
.EP{#}.ERC ERC for the end point # (1...9) DET
.EP.MEA Measured value for the end point in mV KFC
.EP{#}.MEA Measured value for the end point # (1...9) in the units
of the measured value DET, MET, SET, KFT
.EP{#}.MEP Number of end points in the window # (1...9); 1 = 1
end point, 2 = 2 or more end points, 3 = EP cor-
rected with auto drift, 4 = EP corrected with man-
ual drift
DET, MET, SET, KFT
.EP.QTY Measured value (water) for the end point in µg KFC
.EP{#}.TEM Temperature for end point # (1...9) in °C DET, MET. SET, KFT
.EP{#}.TIM Time for reaching end point # (1...9) in s DET, MET, SET, KFT,
KFC
.EP{#}.VOL Volume for end point # (1...9) in mL DET, MET, SET, KFT
.ETE Final temperature (temperature after processing the
command) in °C DET, MET, SET, KFT,
KFC, STAT, MEAS (with-
out T/Flow), CAL MEAS,
STDADD, DOS
.EVT Final volume (total volume added at the end of the
command) in mL DET, MET, SET, KFT,
STAT, DOS
.FIN Command status; 1 = command has been finished
at least once, 0, invalid (variable not present) =
command has never been finished All except START and
END
.FP{#}.DME Difference in measured values for fixed end point #
(1...9) MET
.FP{#}.DVT Drift for fixed end point # (1...9) in µg/min KFC
.FP{#}.ERC ERC for fixed end point # (1...9) DET
.FP{#}.MEA Measured value for fixed end point # (1...9) in mV DET, MET, SET, KFT,
STAT
.FP{#}.MEA Measured value for fixed end point # (1...9) in the units
of the measured value
KFC, MEAS (without
T/Flow)
.FP{#}.QTY Measured value (water) for fixed end point # (1...9) in
µg KFC
.FP{#}.TEM Temperature for fixed end point # (1...9) in °C DET, MET, SET, KFT,
STAT, MEAS (without
T/Flow)
.FP{#}.TIM Time for reaching fixed end point # (1...9) in s DET, MET, SET, KFT,
KFC, STAT, MEAS (with-
out T/Flow)
.FP{#}.VOL Volume for fixed end point # (1...9) in mL DET, MET, SET, KFT,
STAT
.HP{#}.MEA Measured value for HNP # (1...9) in mV (HNP = half-
neutralization potential) DET, MET
.HP{#}.TEM Temperature for HNP # (1...9) in °C DET, MET
.HP{#}.TIM Time for reaching HNP # (1...9) in s DET, MET
.HP{#}.VOL Volume for HNP # (1...9) in mL DET, MET