Metrohm tiamo 1.1 Manual - Manual (Page 162)

134 Workplace
Mark lines
Marks selected lines with a red background for the line number. Before the
start of such a line the corresponding actions defined under Properties on
the tab Process will be triggered.
Unmark lines
Removes the line marking for the selected lines.
Set lines inexecutable
Sets the selected lines to "inexecutable", i.e. these lines will not be carried
out in the method run. Such lines are crossed through with a red line.
Set lines executable
Sets the selected lines to "executable", i.e. they will be carried out in the run.
The menu Sample table beneath the sample table contains the following
menu items:
New
Loads a new and empty sample table.
Load...
Loads a saved sample table into die working sample table. The window
Load sample table opens where the sample table can be selected.
Save as...
Opens the window Save sample table where the current sample table can be
save under a new name.
Run test...
Execute the Run test for the number of lines defined under Autostart in the
working sample table.
Print (PDF)...
Opens the window Print sample table (PDF) in which the output format can
be defined. The sample table is then produced as a PDF file.
Properties...
Opens the window Properties - Determination series in which the properties
for the selected sample table can be set.
Import data...
Opens the window Select files to import for the import of external data.
Reset
Reset all precessed sample data lines to the status "not processed".
Move lines by drag & drop
The lines selected in the working sample table can be moved by drag&drop
into an opened sample table.
Copy lines by drag & drop
The lines selected in the working sample table can be copied with the Ctrl
key pressed down by drag&drop into an opened sample table.